Home

  • Secure payment

    Secure payment

PicoBNC+ wide-range linear temperature probe

TA395
Rating 

The TA395 is a linear temperature lead measuring in the range -40°C to 125°C to cover all common automotive and off-highway applications. The temperature sensor is enclosed in a 5mm stainless steel housing to provide contact and airflow measurement.

NOTE: This product is fitted with a PicoBNC+ interface, allowing it to be recognised by the software for auto-configuration.
The product requires a PicoScope featuring the PicoBNC+ such as the PicoScope 4225A or PicoScope 4425A, and will not work with older PicoScope models.

kr606.00
Tax excluded
Quantity
Contact us for delivery time

 

Customer service (+45) 97 84 11 99

 

Fast delivery 1-2 business days

 

Secure payment via SSL connection

Description

Typical applications:

Engine Typically +20 to +120 °C
Heated seats Typically -10 to +40 °C
Car heaters Typically +0 to +50 °C

The specification of the TA395 is:

Attribute Published specification
Combined length of lead and probe 2.85 m
Maximum voltage and CAT ratings +/-30V ref PC Ground, not CAT rated
Hardware Resolution 0.5 °C
Measuring units °C and °F
IP rating Sensor plus 1st meter of cable sealed to the equivalent of IP67
Measuring range -40 to 125 °C
Calibration / zero offset requirements On start up
Product Details
TA395
5055859705465
Reviews
Write your review

Write your review

PicoBNC+ wide-range linear temperature probe

PicoBNC+ wide-range linear temperature probe

The TA395 is a linear temperature lead measuring in the range -40°C to 125°C to cover all common automotive and off-highway applications. The temperature sensor is enclosed in a 5mm stainless steel housing to provide contact and airflow measurement.

NOTE: This product is fitted with a PicoBNC+ interface, allowing it to be recognised by the software for auto-configuration.
The product requires a PicoScope featuring the PicoBNC+ such as the PicoScope 4225A or PicoScope 4425A, and will not work with older PicoScope models.

Write your review
16 other products in the same category:
Mini fuse extension lead

Reference: TA035

Brand: Pico Technology

Mini fuse extension lead

Review(s): 0

Do you need to measure the current through a circuit but can’t find anywhere on the vehicle where you can connect your current clamp? Fuse extension leads are a simple accessory that can save you valuable time. Fuse extension leads are quick and easy to use: simply remove the fuse (of the circuit you wish to test) from your fusebox and replace it with a...

Price kr132.00
More
In stock, shipped today
Brymen BM319s Automotive...

Reference: BM319S

Brand: Brymen Technology

Brymen BM319s Automotive Multimeter

Review(s): 0

Brymen BM319s Automotive Multimeter incl. K-type temperature sensor and inductive pickup clip.The instrument is double insulated, equipped with high-efficiency fuses with control function and complies with IEC 1010-1 CAT II 1000V.

Price kr1,095.00
More
In stock, shipped today
Secondary ignition pickup...

Reference: MI074

Brand: Pico Technology

Secondary ignition pickup (capacitive with BNC)

Review(s): 0

Due to the high voltages involved in secondary ignition systems, it is not possible to make measurements by direct connection. Attempting to make a direct connection will almost certainly damage the measuring instrument. The MI074 is a capacitive pickup that simply connects around the insulation of an ignition circuit component such as a plug wire. This...

Price kr398.00
More
In stock, shipped today
CAN Test Box (CTB)

Reference: MT619

Brand: MicroTec

CAN Test Box (CTB)

Review(s): 0

The CAN Test Box gives you easy access to the 16 pins of the diagnostic connector that is fitted to all modern vehicles. Depending on the configuration of the vehicle, this may allow you to check power, ground and CAN Bus signal quality. With the test adaptors supplied you can connect your PicoScope automotive scope, or any other suitable scope, to the...

Price kr799.00
More
In stock, shipped today
Automotive Test Lead - 3m

Reference: TA000

Brand: Pico Technology

Automotive Test Lead - 3m

Review(s): 0

The TA000 test lead has been custom made for automotive use with the PicoScope. Its long length (3 meters / approx 10 ft) allows the oscilloscope to be placed on the work bench away from the car being tested / repaired. A wide range of probes, clips and gators can be plugged into the 4mm connectors at the end of the cable. The cable is fully screened to...

Price kr249.00
More
In stock, shipped today
Maxi fuse extension lead

Reference: TA206

Brand: Pico Technology

Maxi fuse extension lead

Review(s): 0

The TA206 maxi fuse extension lead is designed to be used with standard maxi automotive fuses. The maxi fuse is a large blade-style fuse used to protect high-current circuits and handle large inrush currents on some vehicles.

Price kr168.00
More
In stock, shipped today
PicoBNC+ Automotive 10:1...

Reference: TA499

Brand: Pico Technology

PicoBNC+ Automotive 10:1 scope probe & adaptor

Review(s): 0

The Pico 10:1 Scope Probe & Adaptor (TA499) with PicoBNC+™ has a high-impedance, fixed x10 attenuation and is intended for both high-speed signals like CAN, FlexRay and for higher voltage signals such as primary ignition. NOTE: This product is fitted with a PicoBNC+ interface, allowing it to be recognised by the software for auto-configuration.The...

Price kr468.00
More
Contact us for delivery time
PicoBNC+ secondary ignition...

Reference: TA397

Brand: Pico Technology

PicoBNC+ secondary ignition pickup

Review(s): 0

Due to the high voltages involved in secondary ignition systems, it is not possible to make measurements by direct connection. Attempting to make a direct connection will almost certainly damage the measuring instrument. The TA397 is a capacitive pickup that simply connects around the insulation of an ignition circuit component such as a plug wire. This...

Price kr433.00
More
In stock, shipped today
ATC / ATO fuse extension lead

Reference: TA034

Brand: Pico Technology

ATC / ATO fuse extension lead

Review(s): 0

Do you need to measure the current through a circuit but can’t find anywhere on the vehicle where you can connect your current clamp? Fuse extension leads are a simple accessory that can save you valuable time. Fuse extension leads are quick and easy to use: simply remove the fuse (of the circuit you wish to test) from your fusebox and replace it with a...

Price kr132.00
More
In stock, shipped today
Current clamp with BNC plug...

Reference: TA018

Brand: MicroTec

Current clamp with BNC plug (60A AC/DC)

Review(s): 0

60A AC/DC current clamp with BNC connector and 2.5 meter long cable.The TA018 current clamp can measure currents from 10 mA up to 60 A with a switch-selectable high and low range. A simple pushbutton is included for zero adjustment when measuring DC current. The TA018  current clamp meets IEC 61010-1 CAT II 300V and is equipped with LED indication for...

Price kr814.00
More
In stock, shipped today
PicoBNC+ COP and signal probe

Reference: TA398

Brand: Pico Technology

PicoBNC+ COP and signal probe

Review(s): 0

The TA398 COP and signal probe from Pico Technology is the easiest and fastest non-intrusive way to check coil-on-plug ignition coils and spark plugs. NOTE: This product is fitted with a PicoBNC+ interface, allowing it to be recognised by the software for auto-configuration.The product requires a PicoScope featuring the PicoBNC+ such as the PicoScope...

Price kr1,395.00
More
Contact us for delivery time
Multimeter Probes

Reference: MA002

Brand: MicroTec

Multimeter Probes

Review(s): 0

The multimeter probes offer a quick and easy solution, where a permanent connection is not required. A test lead can be connected straight into the 4mm socket in the handle of the probe.

Price kr35.00
More
In stock, shipped today
Black Red
JCASE fuse extension lead

Reference: TA168

Brand: Pico Technology

JCASE fuse extension lead

Review(s): 0

The TA168 JCASE fuse extension lead gives easier access to standard and low profile JCASE fuses. JCASE is a cartridge style fuse with female terminal design, providing both increased time delay and low voltage drop to protect high current circuits & handle inrush currents.

Price kr230.00
More
In stock, shipped today
Coil-On-Plug HT Extension Lead

Reference: TA037

Brand: Pico Technology

Coil-On-Plug HT Extension Lead

Review(s): 0

HT extension leads are the simple accessory that allow you to take accurate secondary ignition measurements on COP ignition systems.

Price kr303.00
More
In stock, shipped today

Follow us on Facebook

Facebook