• Secure payment

  • New

PicoBNC+ Automotive 10:1 scope probe & adaptor

TA499
Rating 

The Pico 10:1 Scope Probe & Adaptor (TA499) with PicoBNC+™ has a high-impedance, fixed x10 attenuation and is intended for both high-speed signals like CAN, FlexRay and for higher voltage signals such as primary ignition.

NOTE: This product is fitted with a PicoBNC+ interface, allowing it to be recognised by the software for auto-configuration.
The product requires a PicoScope featuring the PicoBNC+ such as the PicoScope 4225A or PicoScope 4425A, and will not work with older PicoScope models. Use TA375 if you have a PicoScope model without PicoBNC+.

kr429.00
Tax excluded
Quantity
Contact us for delivery time

 

Customer service (+45) 97 84 11 99

 

Fast delivery 1-2 business days

 

Secure payment via SSL connection

Description

The PicoBNC+™ enables the PicoScope software to auto-configure itself for the TA499 10:1 Scope Probe & Adaptor when used with a compatible PicoScope such as the 4225A or 4425A.

Includes an adapter tip (TA411) that allows the probe to be used with any 4mm test accessories.

Pico TA499 10:1 Scope Probe & Adaptor features:

  • PicoBNC+™ scope connector
  • Attenuated 10:1 (fixed)
  • High Impedance

These accessories are only available for PicoBNC+ and will not work with older PicoScope models.
Use TA375 if you have a PicoScope model without PicoBNC+.

Product Details
TA499
Reviews

Write your review

PicoBNC+ Automotive 10:1 scope probe & adaptor

PicoBNC+ Automotive 10:1 scope probe & adaptor

The Pico 10:1 Scope Probe & Adaptor (TA499) with PicoBNC+™ has a high-impedance, fixed x10 attenuation and is intended for both high-speed signals like CAN, FlexRay and for higher voltage signals such as primary ignition.

NOTE: This product is fitted with a PicoBNC+ interface, allowing it to be recognised by the software for auto-configuration.
The product requires a PicoScope featuring the PicoBNC+ such as the PicoScope 4225A or PicoScope 4425A, and will not work with older PicoScope models. Use TA375 if you have a PicoScope model without PicoBNC+.

Write your review
16 other products in the same category:

Reference: TA019

Brand: Pico Technology

Current clamp (600A AC/DC)

Review(s): 0

600A AC/DC current clamp with BNC connector.The TA019 current clamp is ideal for use with a PicoScope oscilloscope to display starter current waveforms, charging currents and for performing quick compression tests.

Price kr861.00
More
In stock, shipped today

Reference: MI074

Brand: Pico Technology

Secondary ignition pickup (capacitive with BNC)

Review(s): 0

Due to the high voltages involved in secondary ignition systems, it is not possible to make measurements by direct connection. Attempting to make a direct connection will almost certainly damage the measuring instrument. The MI074 is a capacitive pickup that simply connects around the insulation of an ignition circuit component such as a plug wire. This...

Price kr372.00
More
In stock, shipped today

Reference: MA008

Brand: MicroTec

Backpinning Probe Set

Review(s): 0

The Back Probe MT008 is very useful in back probing connectors to measure in an existing circuit without having to use a break out box or damage the wire isolation. The long, thin and flexible pins can easily be slided between the connector housing and the contacts in the connector.

Price kr199.00
More
In stock, shipped today

Reference: MA002

Brand: MicroTec

Multimeter Probes

Review(s): 0

The multimeter probes offer a quick and easy solution, where a permanent connection is not required. A test lead can be connected straight into the 4mm socket in the handle of the probe.

Price kr37.00
More
In stock, shipped today

Reference: TA010

Brand: Pico Technology

20:1 Attenuator

Review(s): 0

The TA010 has been designed to allow fuel injector and primary ignition waveforms to be measured using PicoScope oscilloscope products. The TA010 is a passive 20:1 attenuator. This means that a 20V signal at its input will appear as a 1V signal on the output. As the signal is attenuated, the TA010 allows voltages of up to 300 V to be measured. Please note...

Price kr389.00
More
In stock, shipped today

Reference: MT619

Brand: MicroTec

CAN Test Box (CTB)

Review(s): 0

The CAN Test Box gives you easy access to the 16 pins of the diagnostic connector that is fitted to all modern vehicles. Depending on the configuration of the vehicle, this may allow you to check power, ground and CAN Bus signal quality. With the test adaptors supplied you can connect your PicoScope automotive scope, or any other suitable scope, to the...

Price kr649.00
More
In stock, shipped today

Reference: TA009

Brand: MicroTec

Current clamp with 4mm banana plug (60A AC/DC)

Review(s): 0

60A AC/DC current clamp with 4mm banana plug and 80 cm long coiled cable.The TA009 current clamp can measure currents from 10 mA up to 60 A with a switch-selectable high and low range. A simple pushbutton is included for zero adjustment when measuring DC current. The TA009 current clamp meets IEC 61010-1 CAT II 300V and is equipped with LED indication for...

Price kr599.00
More
In stock, shipped today

Reference: TA388

Brand: Pico Technology

PicoBNC+ 2000 A AC/DC current clamp

Review(s): 0

The 2000 A current clamp allows you to measure up to 2000 amps without cutting, or disconnecting or stripping wires. Simply clamp the jaws around the cable to be tested and plug the clamp into your PicoScope. NOTE: This product is fitted with a PicoBNC+ interface, allowing it to be recognised by the software for auto-configuration.The product requires a...

Price kr1,896.00
More
Contact us for delivery time

Reference: TA475

Brand: Pico Technology

PicoBNC+ Premium Automotive Test Lead, 3 m

Review(s): 0

Our premium PicoBNC+ leads are color-coded so that the color of the lead in the engine bay matches the color of the on-screen waveform in PicoScope Automotive – never again will you waste your time wondering which lead is which. NOTE: This product is fitted with a PicoBNC+ interface, allowing it to be recognised by the software for auto-configuration.The...

Price kr476.00
More
In stock, 1-2 days delivery

Reference: TA007

Brand: Pico Technology

Piercing Clips - set of two

Review(s): 0

The TA007 Insulation Piercing Test Clip set is ideally suited for automotive test and diagnosis.The contacts features insulated wires without cutting or stripping insulation. The spring loaded double V-clamp holds wire centered for piercing needle. This clip featured with pierces insulation on wires from 22 to 14AWG. Tiny hole left in insulation can...

Price kr359.00
More
In stock, shipped today

Reference: TA018

Brand: MicroTec

Current clamp with BNC plug (60A AC/DC)

Review(s): 0

60A AC/DC current clamp with BNC connector and 2.5 meter long cable.The TA018 current clamp can measure currents from 10 mA up to 60 A with a switch-selectable high and low range. A simple pushbutton is included for zero adjustment when measuring DC current. The TA018  current clamp meets IEC 61010-1 CAT II 300V and is equipped with LED indication for...

Price kr769.00
More
In stock, shipped today

Reference: TA162

Brand: Pico Technology

Flexible back-pinning Probes

Review(s): 0

These probes are designed for back-probing under the insulation of multi-plug terminals. The TA161 and TA162 have flexible bends to improve access to difficult areas. Each probe fits onto the 4mm plug of our BNC to 4mm test leads.

Price kr23.00
More
In stock, shipped today

Reference: TA395

Brand: Pico Technology

PicoBNC+ wide-range linear temperature probe

Review(s): 0

The TA395 is a linear temperature lead measuring in the range -40°C to 125°C to cover all common automotive and off-highway applications. The temperature sensor is enclosed in a 5mm stainless steel housing to provide contact and airflow measurement. NOTE: This product is fitted with a PicoBNC+ interface, allowing it to be recognised by the software for...

Price kr572.00
More
Contact us for delivery time

Reference: TA037

Brand: Pico Technology

Coil-On-Plug HT Extension Lead

Review(s): 0

HT extension leads are the simple accessory that allow you to take accurate secondary ignition measurements on COP ignition systems.

Price kr282.00
More
In stock, shipped today

Follow us on Facebook