• Secure payment

  • New

PicoBNC+ 60A AC/DC current clamp

TA473
Rating 

The TA473 current clamp is ideal for use with PicoScope automotive oscilloscopes for measuring currents between 10 mA and 60 A. This enables the PicoScope to display current waveforms for fuel injectors and fuel pumps.

NOTE: This product is fitted with a PicoBNC+ interface, allowing it to be recognised by the software for auto-configuration.
The product requires a PicoScope featuring the PicoBNC+ such as the PicoScope 4225A or PicoScope 4425A, and will not work with older PicoScope models. Use TA018 if you have a PicoScope model without PicoBNC+.

kr1,896.00
Tax excluded
Quantity
Contact us for delivery time

 

Customer service (+45) 97 84 11 99

 

Fast delivery 1-2 business days

 

Secure payment via SSL connection

Description

The TA473 has a specification superior to both the TA018 and TA234 bringing improved performance and diagnostic accuracy to the workshop. In common with the TA388, it is fitted with a PicoBNC+ interface. The clamp can be auto-configured by PicoScope software when it is connected to the scope. Ranging is carried out automatically with no user switching required. The clamp is powered via the scope and therefore does not require any batteries. Additionally, the clamp is auto-zeroed whenever it is connected to the scope.

In use, there is no need to break into the circuit or disturb the isolation as the opening jaws simply clamp around the current-carrying conductor. No electrical contact is required.

These current clamps have been designed for use with PicoScope oscilloscopes and feature additional screening to reduce noise pickup. The Pico TA473 current clamp can either be purchased as an accessory within one of our popular diagnostic kits or individually but requires a PicoScope featuring the PicoBNC+ such as the 4225A or 4425A.

Typical Uses
The TA473 clamp boasts amazing resolution and accuracy with reduced noise levels so ensuring improved measurements in all applications.

  • Petrol and diesel injector operation
  • Solenoid testing
  • Throttle motor functions
  • EGR actuator testing
  • Broadband 02 sensor testing (in conjunction with current multiplier)
  • High current consumption tests up to 60 Amps (Motor lock-up test)
  • Parasitic drain measurements
Product Details
TA473
Reviews

Write your review

PicoBNC+ 60A AC/DC current clamp

PicoBNC+ 60A AC/DC current clamp

The TA473 current clamp is ideal for use with PicoScope automotive oscilloscopes for measuring currents between 10 mA and 60 A. This enables the PicoScope to display current waveforms for fuel injectors and fuel pumps.

NOTE: This product is fitted with a PicoBNC+ interface, allowing it to be recognised by the software for auto-configuration.
The product requires a PicoScope featuring the PicoBNC+ such as the PicoScope 4225A or PicoScope 4425A, and will not work with older PicoScope models. Use TA018 if you have a PicoScope model without PicoBNC+.

Write your review
16 other products in the same category:

Reference: TA037

Brand: Pico Technology

Coil-On-Plug HT Extension Lead

Review(s): 0

HT extension leads are the simple accessory that allow you to take accurate secondary ignition measurements on COP ignition systems.

Price kr282.00
More
In stock, shipped today

Reference: TA395

Brand: Pico Technology

PicoBNC+ wide-range linear temperature probe

Review(s): 0

The TA395 is a linear temperature lead measuring in the range -40°C to 125°C to cover all common automotive and off-highway applications. The temperature sensor is enclosed in a 5mm stainless steel housing to provide contact and airflow measurement. NOTE: This product is fitted with a PicoBNC+ interface, allowing it to be recognised by the software for...

Price kr572.00
More
Contact us for delivery time

Reference: MI074

Brand: Pico Technology

Secondary ignition pickup (capacitive with BNC)

Review(s): 0

Due to the high voltages involved in secondary ignition systems, it is not possible to make measurements by direct connection. Attempting to make a direct connection will almost certainly damage the measuring instrument. The MI074 is a capacitive pickup that simply connects around the insulation of an ignition circuit component such as a plug wire. This...

Price kr372.00
More
In stock, shipped today

Reference: TA475

Brand: Pico Technology

PicoBNC+ Premium Automotive Test Lead, 3 m

Review(s): 0

Our premium PicoBNC+ leads are color-coded so that the color of the lead in the engine bay matches the color of the on-screen waveform in PicoScope Automotive – never again will you waste your time wondering which lead is which. NOTE: This product is fitted with a PicoBNC+ interface, allowing it to be recognised by the software for auto-configuration.The...

Price kr476.00
More
In stock, 1-2 days delivery

Reference: MA012

Brand: MicroTec

2 Pin AMP connector breakout lead

Review(s): 0

The MA012 AMP breakout lead enables you to take voltage readings from the numerous 2-pin sensors and actuators in the engine compartment. Simply connect the breakout lead into the existing cable loom, and then take the output signal from the two 4 mm banana plugs into the automotive oscilloscope using the TA000 test leads. The breakout cable gives access...

Price kr119.00
More
In stock, shipped today

Reference: TA398

Brand: Pico Technology

PicoBNC+ COP and signal probe

Review(s): 0

The TA398 COP and signal probe from Pico Technology is the easiest and fastest non-intrusive way to check coil-on-plug ignition coils and spark plugs. NOTE: This product is fitted with a PicoBNC+ interface, allowing it to be recognised by the software for auto-configuration.The product requires a PicoScope featuring the PicoBNC+ such as the PicoScope...

Price kr1,309.00
More
Contact us for delivery time

Reference: MA002

Brand: MicroTec

Multimeter Probes

Review(s): 0

The multimeter probes offer a quick and easy solution, where a permanent connection is not required. A test lead can be connected straight into the 4mm socket in the handle of the probe.

Price kr37.00
More
In stock, shipped today

Reference: BM319S

Brand: Brymen Technology

Brymen BM319s Automotive Multimeter

Review(s): 0

Brymen BM319s Automotive Multimeter incl. K-type temperature sensor and inductive pickup clip.The instrument is double insulated, equipped with high-efficiency fuses with control function and complies with IEC 1010-1 CAT II 1000V.

Price kr1,095.00
More
In stock, shipped today

Reference: TA162

Brand: Pico Technology

Flexible back-pinning Probes

Review(s): 0

These probes are designed for back-probing under the insulation of multi-plug terminals. The TA161 and TA162 have flexible bends to improve access to difficult areas. Each probe fits onto the 4mm plug of our BNC to 4mm test leads.

Price kr23.00
More
In stock, shipped today

Reference: TA432

Brand: Pico Technology

PicoBNC+ resistance test lead

Review(s): 0

This is a brand-new lead and offers dynamic measurement of resistance which is a feature we are using within our guided tests. The TA432 can be used to test diodes, in addition to resistance measurements. NOTE: This product is fitted with a PicoBNC+ interface, allowing it to be recognised by the software for auto-configuration.The product requires a...

Price kr476.00
More
Contact us for delivery time

Reference: TA018

Brand: MicroTec

Current clamp with BNC plug (60A AC/DC)

Review(s): 0

60A AC/DC current clamp with BNC connector and 2.5 meter long cable.The TA018 current clamp can measure currents from 10 mA up to 60 A with a switch-selectable high and low range. A simple pushbutton is included for zero adjustment when measuring DC current. The TA018  current clamp meets IEC 61010-1 CAT II 300V and is equipped with LED indication for...

Price kr769.00
More
In stock, shipped today

Reference: TA009

Brand: MicroTec

Current clamp with 4mm banana plug (60A AC/DC)

Review(s): 0

60A AC/DC current clamp with 4mm banana plug and 80 cm long coiled cable.The TA009 current clamp can measure currents from 10 mA up to 60 A with a switch-selectable high and low range. A simple pushbutton is included for zero adjustment when measuring DC current. The TA009 current clamp meets IEC 61010-1 CAT II 300V and is equipped with LED indication for...

Price kr599.00
More
In stock, shipped today

Reference: TA010

Brand: Pico Technology

20:1 Attenuator

Review(s): 0

The TA010 has been designed to allow fuel injector and primary ignition waveforms to be measured using PicoScope oscilloscope products. The TA010 is a passive 20:1 attenuator. This means that a 20V signal at its input will appear as a 1V signal on the output. As the signal is attenuated, the TA010 allows voltages of up to 300 V to be measured. Please note...

Price kr389.00
More
In stock, shipped today

Follow us on Facebook