• Secure payment

PicoBNC+ 2000 A AC/DC current clamp

TA388
Rating 

The 2000 A current clamp allows you to measure up to 2000 amps without cutting, or disconnecting or stripping wires. Simply clamp the jaws around the cable to be tested and plug the clamp into your PicoScope.

NOTE: This product is fitted with a PicoBNC+ interface, allowing it to be recognised by the software for auto-configuration.
The product requires a PicoScope featuring the PicoBNC+ such as the PicoScope 4225A or PicoScope 4425A, and will not work with older PicoScope models. Use TA167 if you have a PicoScope model without PicoBNC+.

kr2,009.00
Tax excluded
Quantity
Contact us for delivery time

 

Customer service (+45) 97 84 11 99

 

Fast delivery 1-2 business days

 

Secure payment via SSL connection

Description

The TA388 has a specification to match our popular TA167 200A/2000A clamp but fitted with a PicoBNC+ interface. The clamp can be auto-configured by PicoScope software when connected to the scope. Ranging is carried out automatically with no user switching required. The clamp is powered via the scope and therefore does not require any batteries. Additionally, the clamp is auto-zeroed whenever connected to the scope.

These current clamps have been designed for use with PicoScope oscilloscopes and feature additional screening to reduce noise pickup. The Pico TA388 current clamp can either be purchased as an accessory within one of our popular diagnostic kits or individually but requires a PicoScope featuring the PicoBNC+ such as the 4225A or 4425A.

Typical Uses
The wide range of this clamp allows currents from under 1 A right up to 2000 A to be measured. It can be used with a PicoScope for many applications including:

  • Battery testing with PicoDiagnostics software
  • Relative compression testing
  • Starter motor testing
  • Alternator output testing
  • Hybrid and EV electric motor current

The 2000 A clamp also features auto-ranging allowing the TA388 to be used many applications where a "low amps" clamp would normally be required such as checking injector and ignition current.

Product Details
TA388
5055859705458
Reviews

Write your review

PicoBNC+ 2000 A AC/DC current clamp

PicoBNC+ 2000 A AC/DC current clamp

The 2000 A current clamp allows you to measure up to 2000 amps without cutting, or disconnecting or stripping wires. Simply clamp the jaws around the cable to be tested and plug the clamp into your PicoScope.

NOTE: This product is fitted with a PicoBNC+ interface, allowing it to be recognised by the software for auto-configuration.
The product requires a PicoScope featuring the PicoBNC+ such as the PicoScope 4225A or PicoScope 4425A, and will not work with older PicoScope models. Use TA167 if you have a PicoScope model without PicoBNC+.

Write your review
16 other products in the same category:

Reference: TA432

Brand: Pico Technology

PicoBNC+ resistance test lead

Review(s): 0

This is a brand-new lead and offers dynamic measurement of resistance which is a feature we are using within our guided tests. The TA432 can be used to test diodes, in addition to resistance measurements. NOTE: This product is fitted with a PicoBNC+ interface, allowing it to be recognised by the software for auto-configuration.The product requires a...

Price kr502.00
More
Contact us for delivery time

Reference: TA034

Brand: Pico Technology

ATC / ATO fuse extension lead

Review(s): 0

Do you need to measure the current through a circuit but can’t find anywhere on the vehicle where you can connect your current clamp? Fuse extension leads are a simple accessory that can save you valuable time. Fuse extension leads are quick and easy to use: simply remove the fuse (of the circuit you wish to test) from your fusebox and replace it with a...

Price kr132.00
More
In stock, 1-2 days delivery

Reference: MA002

Brand: MicroTec

Multimeter Probes

Review(s): 0

The multimeter probes offer a quick and easy solution, where a permanent connection is not required. A test lead can be connected straight into the 4mm socket in the handle of the probe.

Price kr35.00
More
In stock, shipped today

Reference: TA475

Brand: Pico Technology

PicoBNC+ Premium Automotive Test Lead, 3 m

Review(s): 0

Our premium PicoBNC+ leads are color-coded so that the color of the lead in the engine bay matches the color of the on-screen waveform in PicoScope Automotive – never again will you waste your time wondering which lead is which. NOTE: This product is fitted with a PicoBNC+ interface, allowing it to be recognised by the software for auto-configuration.The...

Price kr502.00
More
In stock, 1-2 days delivery

Reference: TA007

Brand: Pico Technology

Piercing Clips - set of two

Review(s): 0

The TA007 Insulation Piercing Test Clip set is ideally suited for automotive test and diagnosis.The contacts features insulated wires without cutting or stripping insulation. The spring loaded double V-clamp holds wire centered for piercing needle. This clip featured with pierces insulation on wires from 22 to 14AWG. Tiny hole left in insulation can...

Price kr433.00
More
In stock, shipped today

Reference: TA018

Brand: MicroTec

Current clamp with BNC plug (60A AC/DC)

Review(s): 0

60A AC/DC current clamp with BNC connector and 2.5 meter long cable.The TA018 current clamp can measure currents from 10 mA up to 60 A with a switch-selectable high and low range. A simple pushbutton is included for zero adjustment when measuring DC current. The TA018  current clamp meets IEC 61010-1 CAT II 300V and is equipped with LED indication for...

Price kr814.00
More
In stock, shipped today

Reference: TA395

Brand: Pico Technology

PicoBNC+ wide-range linear temperature probe

Review(s): 0

The TA395 is a linear temperature lead measuring in the range -40°C to 125°C to cover all common automotive and off-highway applications. The temperature sensor is enclosed in a 5mm stainless steel housing to provide contact and airflow measurement. NOTE: This product is fitted with a PicoBNC+ interface, allowing it to be recognised by the software for...

Price kr606.00
More
Contact us for delivery time

Reference: MA006

Brand: MicroTec

Large Dolphin/Gator Clips

Review(s): 0

The 4mm socket in the back of the Dolphin clip offers an easy connection to a test lead. The toothed grip offers good contact on fine wire, with a 30mm opening diameter limit.

Price kr65.00
More
In stock, shipped today

Reference: TA004

Brand: Pico Technology

Small Crocodile/Gator Clips

Review(s): 0

The crocodile (gator) clips are fully insulated with a 4mm socket in the handle, offering an easy connection to a test lead. The toothed grip offers good contact on fine wire, with a 11mm jaw opening limit.

Price kr17.00
More
In stock, shipped today

Reference: TA397

Brand: Pico Technology

PicoBNC+ secondary ignition pickup

Review(s): 0

Due to the high voltages involved in secondary ignition systems, it is not possible to make measurements by direct connection. Attempting to make a direct connection will almost certainly damage the measuring instrument. The TA397 is a capacitive pickup that simply connects around the insulation of an ignition circuit component such as a plug wire. This...

Price kr433.00
More
In stock, shipped today

Reference: BM319S

Brand: Brymen Technology

Brymen BM319s Automotive Multimeter

Review(s): 0

Brymen BM319s Automotive Multimeter incl. K-type temperature sensor and inductive pickup clip.The instrument is double insulated, equipped with high-efficiency fuses with control function and complies with IEC 1010-1 CAT II 1000V.

Price kr1,095.00
More
In stock, shipped today

Reference: TA168

Brand: Pico Technology

JCASE fuse extension lead

Review(s): 0

The TA168 JCASE fuse extension lead gives easier access to standard and low profile JCASE fuses. JCASE is a cartridge style fuse with female terminal design, providing both increased time delay and low voltage drop to protect high current circuits & handle inrush currents.

Price kr230.00
More
In stock, shipped today

Reference: PP967

Brand: Pico Technology

Fuse extension leads kit

Review(s): 0

Do you need to measure the current through a circuit but can’t find anywhere on the vehicle where you can connect your current clamp? Fuse extension leads are a simple accessory that can save you valuable time. Fuse extension leads are quick and easy to use: simply remove the fuse (of the circuit you wish to test) from your fusebox and replace it with a...

Price kr669.00
More
In stock, shipped today

Reference: TA162

Brand: Pico Technology

Flexible back-pinning Probes

Review(s): 0

These probes are designed for back-probing under the insulation of multi-plug terminals. The TA161 and TA162 have flexible bends to improve access to difficult areas. Each probe fits onto the 4mm plug of our BNC to 4mm test leads.

Price kr26.00
More
In stock, shipped today

Reference: TA206

Brand: Pico Technology

Maxi fuse extension lead

Review(s): 0

The TA206 maxi fuse extension lead is designed to be used with standard maxi automotive fuses. The maxi fuse is a large blade-style fuse used to protect high-current circuits and handle large inrush currents on some vehicles.

Price kr168.00
More
In stock, shipped today

Follow us on Facebook