• Secure payment

  • New
Coil-On-Plug HT Extension Lead
  • Coil-On-Plug HT Extension Lead
  • Coil-On-Plug HT Extension Lead
  • Coil-On-Plug HT Extension Lead
  • Coil-On-Plug HT Extension Lead

Coil-On-Plug HT Extension Lead

TA037
Rating 

HT extension leads are the simple accessory that allow you to take accurate secondary ignition measurements on COP ignition systems.

kr282.00
Tax excluded
Quantity
In stock, shipped today

 

Customer service (+45) 97 84 11 99

 

Fast delivery 1-2 business days

 

Secure payment via SSL connection

Description

HT extension leads are designed to aid diagnostics on secondary ignition circuits by allowing an HT measurement to be made when there is no, or limited, access to any spark plug leads. The leads are specifically designed for use with the MI074 Secondary Ignition Pickup.

HT extension leads are easy to use: simply fit them between the coil pack and the plugs, place a capacitive secondary ignition pickup on each lead, and your scope will show accurate ignition waveforms with correct kV measurements.

HT extension leads are designed for use with PicoScope automotive scopes, but can also be used on all other labscopes that are capable of displaying ignition patterns.

Product Details
TA037
Datasheets & Brochures
Download
TA037 HT Extension Lead Guide

TA037 HT Extension Lead Quick Start Guide

Download (196.16k)
Reviews

Write your review

Coil-On-Plug HT Extension Lead

Coil-On-Plug HT Extension Lead

HT extension leads are the simple accessory that allow you to take accurate secondary ignition measurements on COP ignition systems.

Write your review
Related Products

Reference: MI074

Brand: Pico Technology

Secondary ignition pickup (capacitive with BNC)

Review(s): 0

Due to the high voltages involved in secondary ignition systems, it is not possible to make measurements by direct connection. Attempting to make a direct connection will almost certainly damage the measuring instrument. The MI074 is a capacitive pickup that simply connects around the insulation of an ignition circuit component such as a plug wire. This...

Price kr372.00
More
In stock, shipped today

Reference: TA397

Brand: Pico Technology

PicoBNC+ secondary ignition pickup

Review(s): 0

Due to the high voltages involved in secondary ignition systems, it is not possible to make measurements by direct connection. Attempting to make a direct connection will almost certainly damage the measuring instrument. The TA397 is a capacitive pickup that simply connects around the insulation of an ignition circuit component such as a plug wire. This...

Price kr401.00
More
In stock, shipped today
16 other products in the same category:

Reference: TA475

Brand: Pico Technology

PicoBNC+ Premium Automotive Test Lead, 3 m

Review(s): 0

Our premium PicoBNC+ leads are color-coded so that the color of the lead in the engine bay matches the color of the on-screen waveform in PicoScope Automotive – never again will you waste your time wondering which lead is which. NOTE: This product is fitted with a PicoBNC+ interface, allowing it to be recognised by the software for auto-configuration.The...

Price kr476.00
More
In stock, 1-2 days delivery

Reference: TA162

Brand: Pico Technology

Flexible back-pinning Probes

Review(s): 0

These probes are designed for back-probing under the insulation of multi-plug terminals. The TA161 and TA162 have flexible bends to improve access to difficult areas. Each probe fits onto the 4mm plug of our BNC to 4mm test leads.

Price kr23.00
More
In stock, shipped today

Reference: TA499

Brand: Pico Technology

PicoBNC+ Automotive 10:1 scope probe & adaptor

Review(s): 0

The Pico 10:1 Scope Probe & Adaptor (TA499) with PicoBNC+™ has a high-impedance, fixed x10 attenuation and is intended for both high-speed signals like CAN, FlexRay and for higher voltage signals such as primary ignition. NOTE: This product is fitted with a PicoBNC+ interface, allowing it to be recognised by the software for auto-configuration.The...

Price kr429.00
More
Contact us for delivery time

Reference: TA000

Brand: Pico Technology

Automotive Test Lead - 3m

Review(s): 0

The TA000 test lead has been custom made for automotive use with the PicoScope. Its long length (3 meters / approx 10 ft) allows the oscilloscope to be placed on the work bench away from the car being tested / repaired. A wide range of probes, clips and gators can be plugged into the 4mm connectors at the end of the cable. The cable is fully screened to...

Price kr209.00
More
In stock, 1-2 days delivery

Reference: MA006

Brand: MicroTec

Large Dolphin/Gator Clips

Review(s): 0

The 4mm socket in the back of the Dolphin clip offers an easy connection to a test lead. The toothed grip offers good contact on fine wire, with a 30mm opening diameter limit.

Price kr65.00
More
In stock, shipped today

Reference: TA388

Brand: Pico Technology

PicoBNC+ 2000 A AC/DC current clamp

Review(s): 0

The 2000 A current clamp allows you to measure up to 2000 amps without cutting, or disconnecting or stripping wires. Simply clamp the jaws around the cable to be tested and plug the clamp into your PicoScope. NOTE: This product is fitted with a PicoBNC+ interface, allowing it to be recognised by the software for auto-configuration.The product requires a...

Price kr1,896.00
More
Contact us for delivery time

Reference: TA007

Brand: Pico Technology

Piercing Clips - set of two

Review(s): 0

The TA007 Insulation Piercing Test Clip set is ideally suited for automotive test and diagnosis.The contacts features insulated wires without cutting or stripping insulation. The spring loaded double V-clamp holds wire centered for piercing needle. This clip featured with pierces insulation on wires from 22 to 14AWG. Tiny hole left in insulation can...

Price kr359.00
More
In stock, shipped today

Reference: MT619

Brand: MicroTec

CAN Test Box (CTB)

Review(s): 0

The CAN Test Box gives you easy access to the 16 pins of the diagnostic connector that is fitted to all modern vehicles. Depending on the configuration of the vehicle, this may allow you to check power, ground and CAN Bus signal quality. With the test adaptors supplied you can connect your PicoScope automotive scope, or any other suitable scope, to the...

Price kr649.00
More
In stock, shipped today

Reference: MA012

Brand: MicroTec

2 Pin AMP connector breakout lead

Review(s): 0

The MA012 AMP breakout lead enables you to take voltage readings from the numerous 2-pin sensors and actuators in the engine compartment. Simply connect the breakout lead into the existing cable loom, and then take the output signal from the two 4 mm banana plugs into the automotive oscilloscope using the TA000 test leads. The breakout cable gives access...

Price kr119.00
More
In stock, shipped today

Reference: TA432

Brand: Pico Technology

PicoBNC+ resistance test lead

Review(s): 0

This is a brand-new lead and offers dynamic measurement of resistance which is a feature we are using within our guided tests. The TA432 can be used to test diodes, in addition to resistance measurements. NOTE: This product is fitted with a PicoBNC+ interface, allowing it to be recognised by the software for auto-configuration.The product requires a...

Price kr476.00
More
Contact us for delivery time

Reference: TA004

Brand: Pico Technology

Small Crocodile/Gator Clips

Review(s): 0

The crocodile (gator) clips are fully insulated with a 4mm socket in the handle, offering an easy connection to a test lead. The toothed grip offers good contact on fine wire, with a 11mm jaw opening limit.

Price kr13.00
More
In stock, shipped today

Reference: MI074

Brand: Pico Technology

Secondary ignition pickup (capacitive with BNC)

Review(s): 0

Due to the high voltages involved in secondary ignition systems, it is not possible to make measurements by direct connection. Attempting to make a direct connection will almost certainly damage the measuring instrument. The MI074 is a capacitive pickup that simply connects around the insulation of an ignition circuit component such as a plug wire. This...

Price kr372.00
More
In stock, shipped today

Reference: TA473

Brand: Pico Technology

PicoBNC+ 60A AC/DC current clamp

Review(s): 0

The TA473 current clamp is ideal for use with PicoScope automotive oscilloscopes for measuring currents between 10 mA and 60 A. This enables the PicoScope to display current waveforms for fuel injectors and fuel pumps. NOTE: This product is fitted with a PicoBNC+ interface, allowing it to be recognised by the software for auto-configuration.The product...

Price kr1,896.00
More
Contact us for delivery time

Reference: BM319S

Brand: Brymen Technology

Brymen BM319s Automotive Multimeter

Review(s): 0

Brymen BM319s Automotive Multimeter incl. K-type temperature sensor and inductive pickup clip.The instrument is double insulated, equipped with high-efficiency fuses with control function and complies with IEC 1010-1 CAT II 1000V.

Price kr1,095.00
More
In stock, shipped today

Reference: TA398

Brand: Pico Technology

PicoBNC+ COP and signal probe

Review(s): 0

The TA398 COP and signal probe from Pico Technology is the easiest and fastest non-intrusive way to check coil-on-plug ignition coils and spark plugs. NOTE: This product is fitted with a PicoBNC+ interface, allowing it to be recognised by the software for auto-configuration.The product requires a PicoScope featuring the PicoBNC+ such as the PicoScope...

Price kr1,309.00
More
Contact us for delivery time

Follow us on Facebook