• Secure payment

  • New
Coil-On-Plug HT Extension Lead (set of 4 leads)
  • Coil-On-Plug HT Extension Lead
  • Coil-On-Plug HT Extension Lead (set of 4 leads)
  • Coil-On-Plug HT Extension Lead
  • Coil-On-Plug HT Extension Lead
  • Coil-On-Plug HT Extension Lead

Coil-On-Plug HT Extension Lead (set of 4 leads)

PP400
Rating 

HT extension leads are the simple accessory that allow you to take accurate secondary ignition measurements on COP ignition systems.

kr1,160.00
Tax excluded
Quantity
In stock, shipped today

 

Customer service (+45) 97 84 11 99

 

Fast delivery 1-2 business days

 

Secure payment via SSL connection

Description

HT extension leads are designed to aid diagnostics on secondary ignition circuits by allowing an HT measurement to be made when there is no, or limited, access to any spark plug leads. The leads are specifically designed for use with the MI074 Secondary Ignition Pickup.

HT extension leads are easy to use: simply fit them between the coil pack and the plugs, place a capacitive secondary ignition pickup on each lead, and your scope will show accurate ignition waveforms with correct kV measurements.

HT extension leads are designed for use with PicoScope automotive scopes, but can also be used on all other labscopes that are capable of displaying ignition patterns.

Product Details
PP400
Datasheets & Brochures
Download
TA037 HT Extension Lead Guide

TA037 HT Extension Lead Quick Start Guide

Download (196.16k)
Reviews

Write your review

Coil-On-Plug HT Extension Lead (set of 4 leads)

Coil-On-Plug HT Extension Lead (set of 4 leads)

HT extension leads are the simple accessory that allow you to take accurate secondary ignition measurements on COP ignition systems.

Write your review
Related Products

Reference: MI074

Brand: Pico Technology

Secondary ignition pickup (capacitive with BNC)

Review(s): 0

Due to the high voltages involved in secondary ignition systems, it is not possible to make measurements by direct connection. Attempting to make a direct connection will almost certainly damage the measuring instrument. The MI074 is a capacitive pickup that simply connects around the insulation of an ignition circuit component such as a plug wire. This...

Price kr372.00
More
In stock, shipped today

Reference: TA397

Brand: Pico Technology

PicoBNC+ secondary ignition pickup

Review(s): 0

Due to the high voltages involved in secondary ignition systems, it is not possible to make measurements by direct connection. Attempting to make a direct connection will almost certainly damage the measuring instrument. The TA397 is a capacitive pickup that simply connects around the insulation of an ignition circuit component such as a plug wire. This...

Price kr401.00
More
In stock, shipped today
16 other products in the same category:

Reference: TA018

Brand: MicroTec

Current clamp with BNC plug (60A AC/DC)

Review(s): 0

60A AC/DC current clamp with BNC connector and 2.5 meter long cable.The TA018 current clamp can measure currents from 10 mA up to 60 A with a switch-selectable high and low range. A simple pushbutton is included for zero adjustment when measuring DC current. The TA018  current clamp meets IEC 61010-1 CAT II 300V and is equipped with LED indication for...

Price kr769.00
More
In stock, shipped today

Reference: TA009

Brand: MicroTec

Current clamp with 4mm banana plug (60A AC/DC)

Review(s): 0

60A AC/DC current clamp with 4mm banana plug and 80 cm long coiled cable.The TA009 current clamp can measure currents from 10 mA up to 60 A with a switch-selectable high and low range. A simple pushbutton is included for zero adjustment when measuring DC current. The TA009 current clamp meets IEC 61010-1 CAT II 300V and is equipped with LED indication for...

Price kr599.00
More
In stock, shipped today

Reference: TA162

Brand: Pico Technology

Flexible back-pinning Probes

Review(s): 0

These probes are designed for back-probing under the insulation of multi-plug terminals. The TA161 and TA162 have flexible bends to improve access to difficult areas. Each probe fits onto the 4mm plug of our BNC to 4mm test leads.

Price kr23.00
More
In stock, shipped today

Reference: TA398

Brand: Pico Technology

PicoBNC+ COP and signal probe

Review(s): 0

The TA398 COP and signal probe from Pico Technology is the easiest and fastest non-intrusive way to check coil-on-plug ignition coils and spark plugs. NOTE: This product is fitted with a PicoBNC+ interface, allowing it to be recognised by the software for auto-configuration.The product requires a PicoScope featuring the PicoBNC+ such as the PicoScope...

Price kr1,309.00
More
Contact us for delivery time

Reference: TA432

Brand: Pico Technology

PicoBNC+ resistance test lead

Review(s): 0

This is a brand-new lead and offers dynamic measurement of resistance which is a feature we are using within our guided tests. The TA432 can be used to test diodes, in addition to resistance measurements. NOTE: This product is fitted with a PicoBNC+ interface, allowing it to be recognised by the software for auto-configuration.The product requires a...

Price kr476.00
More
Contact us for delivery time

Reference: TA010

Brand: Pico Technology

20:1 Attenuator

Review(s): 0

The TA010 has been designed to allow fuel injector and primary ignition waveforms to be measured using PicoScope oscilloscope products. The TA010 is a passive 20:1 attenuator. This means that a 20V signal at its input will appear as a 1V signal on the output. As the signal is attenuated, the TA010 allows voltages of up to 300 V to be measured. Please note...

Price kr389.00
More
In stock, shipped today

Reference: MA008

Brand: MicroTec

Backpinning Probe Set

Review(s): 0

The Back Probe MT008 is very useful in back probing connectors to measure in an existing circuit without having to use a break out box or damage the wire isolation. The long, thin and flexible pins can easily be slided between the connector housing and the contacts in the connector.

Price kr199.00
More
In stock, shipped today

Reference: MT619

Brand: MicroTec

CAN Test Box (CTB)

Review(s): 0

The CAN Test Box gives you easy access to the 16 pins of the diagnostic connector that is fitted to all modern vehicles. Depending on the configuration of the vehicle, this may allow you to check power, ground and CAN Bus signal quality. With the test adaptors supplied you can connect your PicoScope automotive scope, or any other suitable scope, to the...

Price kr649.00
More
In stock, shipped today

Reference: BM319S

Brand: Brymen Technology

Brymen BM319s Automotive Multimeter

Review(s): 0

Brymen BM319s Automotive Multimeter incl. K-type temperature sensor and inductive pickup clip.The instrument is double insulated, equipped with high-efficiency fuses with control function and complies with IEC 1010-1 CAT II 1000V.

Price kr1,095.00
More
In stock, shipped today

Reference: MI074

Brand: Pico Technology

Secondary ignition pickup (capacitive with BNC)

Review(s): 0

Due to the high voltages involved in secondary ignition systems, it is not possible to make measurements by direct connection. Attempting to make a direct connection will almost certainly damage the measuring instrument. The MI074 is a capacitive pickup that simply connects around the insulation of an ignition circuit component such as a plug wire. This...

Price kr372.00
More
In stock, shipped today

Reference: TA388

Brand: Pico Technology

PicoBNC+ 2000 A AC/DC current clamp

Review(s): 0

The 2000 A current clamp allows you to measure up to 2000 amps without cutting, or disconnecting or stripping wires. Simply clamp the jaws around the cable to be tested and plug the clamp into your PicoScope. NOTE: This product is fitted with a PicoBNC+ interface, allowing it to be recognised by the software for auto-configuration.The product requires a...

Price kr1,896.00
More
Contact us for delivery time

Reference: TA397

Brand: Pico Technology

PicoBNC+ secondary ignition pickup

Review(s): 0

Due to the high voltages involved in secondary ignition systems, it is not possible to make measurements by direct connection. Attempting to make a direct connection will almost certainly damage the measuring instrument. The TA397 is a capacitive pickup that simply connects around the insulation of an ignition circuit component such as a plug wire. This...

Price kr401.00
More
In stock, shipped today

Reference: TA499

Brand: Pico Technology

PicoBNC+ Automotive 10:1 scope probe & adaptor

Review(s): 0

The Pico 10:1 Scope Probe & Adaptor (TA499) with PicoBNC+™ has a high-impedance, fixed x10 attenuation and is intended for both high-speed signals like CAN, FlexRay and for higher voltage signals such as primary ignition. NOTE: This product is fitted with a PicoBNC+ interface, allowing it to be recognised by the software for auto-configuration.The...

Price kr429.00
More
Contact us for delivery time

Reference: TA019

Brand: Pico Technology

Current clamp (600A AC/DC)

Review(s): 0

600A AC/DC current clamp with BNC connector.The TA019 current clamp is ideal for use with a PicoScope oscilloscope to display starter current waveforms, charging currents and for performing quick compression tests.

Price kr861.00
More
In stock, shipped today

Reference: TA473

Brand: Pico Technology

PicoBNC+ 60A AC/DC current clamp

Review(s): 0

The TA473 current clamp is ideal for use with PicoScope automotive oscilloscopes for measuring currents between 10 mA and 60 A. This enables the PicoScope to display current waveforms for fuel injectors and fuel pumps. NOTE: This product is fitted with a PicoBNC+ interface, allowing it to be recognised by the software for auto-configuration.The product...

Price kr1,896.00
More
Contact us for delivery time

Follow us on Facebook