• Secure payment

Backpinning Probe Set

MA008
MicroTec
Rating 

The Back Probe MT008 is very useful in back probing connectors to measure in an existing circuit without having to use a break out box or damage the wire isolation. The long, thin and flexible pins can easily be slided between the connector housing and the contacts in the connector.

kr199.00
Tax excluded
Quantity
In stock, shipped today

 

Customer service (+45) 97 84 11 99

 

Fast delivery 1-2 business days

 

Secure payment via SSL connection

Description

MT008 is a back pinning probe
First and foremost the MT008 is a back pinning probe. In fact, it’s the smallest diameter back pinning probe that we know of. This is essential for probing today's small, fragile connector. It is also very sharp, so it slides past connector seals with ease. This product solves most of the problems associated with traditional back-pinning methods.

The MT008 is a piercing probe
Secondly, the MT008 is a piercing probe. Its small diameter, extra sharp pin makes it ideal for piercing the insulation on small gauge wires where traditional piercing tools might cause damage.

The MT008 is field repairable
And finally, here's the best part. Don't you just hate it when you are using a back pinning probe and it bends or breaks? Before the TA008 came along, this meant that you had to buy a whole new back-probe. Not with the MT008; it's repairable. If the pin becomes damaged or useless in any way, simply take your pocket screwdriver, remove the set screw, pull out the old pin and install the new one! There's no need to replace the whole probe.

Contents:

  • 5 Complete acupuncture probes
  • 2 Screws
  • 20 Replacement needles
Product Details
MA008
0745178127752
Reviews

Write your review

Backpinning Probe Set

Backpinning Probe Set

The Back Probe MT008 is very useful in back probing connectors to measure in an existing circuit without having to use a break out box or damage the wire isolation. The long, thin and flexible pins can easily be slided between the connector housing and the contacts in the connector.

Write your review
Related Products

Reference: TA004

Brand: Pico Technology

Small Crocodile/Gator Clips

Review(s): 0

The crocodile (gator) clips are fully insulated with a 4mm socket in the handle, offering an easy connection to a test lead. The toothed grip offers good contact on fine wire, with a 11mm jaw opening limit.

Price kr17.00
More
In stock, shipped today

Reference: TA162

Brand: Pico Technology

Flexible back-pinning Probes

Review(s): 0

These probes are designed for back-probing under the insulation of multi-plug terminals. The TA161 and TA162 have flexible bends to improve access to difficult areas. Each probe fits onto the 4mm plug of our BNC to 4mm test leads.

Price kr26.00
More
In stock, shipped today

Reference: MA002

Brand: MicroTec

Multimeter Probes

Review(s): 0

The multimeter probes offer a quick and easy solution, where a permanent connection is not required. A test lead can be connected straight into the 4mm socket in the handle of the probe.

Price kr35.00
More
In stock, shipped today

Reference: MA006

Brand: MicroTec

Large Dolphin/Gator Clips

Review(s): 0

The 4mm socket in the back of the Dolphin clip offers an easy connection to a test lead. The toothed grip offers good contact on fine wire, with a 30mm opening diameter limit.

Price kr65.00
More
In stock, shipped today

Reference: TA007

Brand: Pico Technology

Piercing Clips - set of two

Review(s): 0

The TA007 Insulation Piercing Test Clip set is ideally suited for automotive test and diagnosis.The contacts features insulated wires without cutting or stripping insulation. The spring loaded double V-clamp holds wire centered for piercing needle. This clip featured with pierces insulation on wires from 22 to 14AWG. Tiny hole left in insulation can...

Price kr433.00
More
In stock, shipped today

Reference: TA000

Brand: Pico Technology

Automotive Test Lead - 3m

Review(s): 0

The TA000 test lead has been custom made for automotive use with the PicoScope. Its long length (3 meters / approx 10 ft) allows the oscilloscope to be placed on the work bench away from the car being tested / repaired. A wide range of probes, clips and gators can be plugged into the 4mm connectors at the end of the cable. The cable is fully screened to...

Price kr249.00
More
In stock, shipped today
16 other products in the same category:

Reference: TA162

Brand: Pico Technology

Flexible back-pinning Probes

Review(s): 0

These probes are designed for back-probing under the insulation of multi-plug terminals. The TA161 and TA162 have flexible bends to improve access to difficult areas. Each probe fits onto the 4mm plug of our BNC to 4mm test leads.

Price kr26.00
More
In stock, shipped today

Reference: TA168

Brand: Pico Technology

JCASE fuse extension lead

Review(s): 0

The TA168 JCASE fuse extension lead gives easier access to standard and low profile JCASE fuses. JCASE is a cartridge style fuse with female terminal design, providing both increased time delay and low voltage drop to protect high current circuits & handle inrush currents.

Price kr230.00
More
In stock, shipped today

Reference: TA009

Brand: MicroTec

Current clamp with 4mm banana plug (60A AC/DC)

Review(s): 0

60A AC/DC current clamp with 4mm banana plug and 80 cm long coiled cable.The TA009 current clamp can measure currents from 10 mA up to 60 A with a switch-selectable high and low range. A simple pushbutton is included for zero adjustment when measuring DC current. The TA009 current clamp meets IEC 61010-1 CAT II 300V and is equipped with LED indication for...

Price kr691.00
More
In stock, shipped today

Reference: MA002

Brand: MicroTec

Multimeter Probes

Review(s): 0

The multimeter probes offer a quick and easy solution, where a permanent connection is not required. A test lead can be connected straight into the 4mm socket in the handle of the probe.

Price kr35.00
More
In stock, shipped today

Reference: TA010

Brand: Pico Technology

20:1 Attenuator

Review(s): 0

The TA010 has been designed to allow fuel injector and primary ignition waveforms to be measured using PicoScope oscilloscope products. The TA010 is a passive 20:1 attenuator. This means that a 20V signal at its input will appear as a 1V signal on the output. As the signal is attenuated, the TA010 allows voltages of up to 300 V to be measured. Please note...

Price kr389.00
More
In stock, shipped today

Reference: TA398

Brand: Pico Technology

PicoBNC+ COP and signal probe

Review(s): 0

The TA398 COP and signal probe from Pico Technology is the easiest and fastest non-intrusive way to check coil-on-plug ignition coils and spark plugs. NOTE: This product is fitted with a PicoBNC+ interface, allowing it to be recognised by the software for auto-configuration.The product requires a PicoScope featuring the PicoBNC+ such as the PicoScope...

Price kr1,395.00
More
Contact us for delivery time

Reference: TA475

Brand: Pico Technology

PicoBNC+ Premium Automotive Test Lead, 3 m

Review(s): 0

Our premium PicoBNC+ leads are color-coded so that the color of the lead in the engine bay matches the color of the on-screen waveform in PicoScope Automotive – never again will you waste your time wondering which lead is which. NOTE: This product is fitted with a PicoBNC+ interface, allowing it to be recognised by the software for auto-configuration.The...

Price kr502.00
More
In stock, 1-2 days delivery

Reference: MT619

Brand: MicroTec

CAN Test Box (CTB)

Review(s): 0

The CAN Test Box gives you easy access to the 16 pins of the diagnostic connector that is fitted to all modern vehicles. Depending on the configuration of the vehicle, this may allow you to check power, ground and CAN Bus signal quality. With the test adaptors supplied you can connect your PicoScope automotive scope, or any other suitable scope, to the...

Price kr799.00
More
In stock, shipped today

Reference: TA499

Brand: Pico Technology

PicoBNC+ Automotive 10:1 scope probe & adaptor

Review(s): 0

The Pico 10:1 Scope Probe & Adaptor (TA499) with PicoBNC+™ has a high-impedance, fixed x10 attenuation and is intended for both high-speed signals like CAN, FlexRay and for higher voltage signals such as primary ignition. NOTE: This product is fitted with a PicoBNC+ interface, allowing it to be recognised by the software for auto-configuration.The...

Price kr468.00
More
Contact us for delivery time

Reference: MA006

Brand: MicroTec

Large Dolphin/Gator Clips

Review(s): 0

The 4mm socket in the back of the Dolphin clip offers an easy connection to a test lead. The toothed grip offers good contact on fine wire, with a 30mm opening diameter limit.

Price kr65.00
More
In stock, shipped today

Reference: TA007

Brand: Pico Technology

Piercing Clips - set of two

Review(s): 0

The TA007 Insulation Piercing Test Clip set is ideally suited for automotive test and diagnosis.The contacts features insulated wires without cutting or stripping insulation. The spring loaded double V-clamp holds wire centered for piercing needle. This clip featured with pierces insulation on wires from 22 to 14AWG. Tiny hole left in insulation can...

Price kr433.00
More
In stock, shipped today

Reference: TA395

Brand: Pico Technology

PicoBNC+ wide-range linear temperature probe

Review(s): 0

The TA395 is a linear temperature lead measuring in the range -40°C to 125°C to cover all common automotive and off-highway applications. The temperature sensor is enclosed in a 5mm stainless steel housing to provide contact and airflow measurement. NOTE: This product is fitted with a PicoBNC+ interface, allowing it to be recognised by the software for...

Price kr606.00
More
Contact us for delivery time

Reference: TA473

Brand: Pico Technology

PicoBNC+ 60A AC/DC current clamp

Review(s): 0

The TA473 current clamp is ideal for use with PicoScope automotive oscilloscopes for measuring currents between 10 mA and 60 A. This enables the PicoScope to display current waveforms for fuel injectors and fuel pumps. NOTE: This product is fitted with a PicoBNC+ interface, allowing it to be recognised by the software for auto-configuration.The product...

Price kr2,009.00
More
Contact us for delivery time

Follow us on Facebook