• Secure payment

20:1 Attenuator

TA010
Rating 

The TA010 has been designed to allow fuel injector and primary ignition waveforms to be measured using PicoScope oscilloscope products.

The TA010 is a passive 20:1 attenuator. This means that a 20V signal at its input will appear as a 1V signal on the output. As the signal is attenuated, the TA010 allows voltages of up to 300 V to be measured.

Please note this attenuator should not be used for any high voltage measurements other than fuel injectors and primary ignition.

kr389.00
Tax excluded
Quantity
In stock, shipped today

 

Customer service (+45) 97 84 11 99

 

Fast delivery 1-2 business days

 

Secure payment via SSL connection

Description

The TA010, when used with Pico PC Oscilloscopes provides increased input protection against overloads when working with inductive signals such as injectors and primary ignition. Under no circumstances attempt to use this attenuator to measure secondary ignition (HT) waveforms, the MI074 Secondary Ignition Pickup lead should be used for this purpose.

Product Details
TA010
0889743491357
Datasheets & Brochures
Download
Reviews

Write your review

20:1 Attenuator

20:1 Attenuator

The TA010 has been designed to allow fuel injector and primary ignition waveforms to be measured using PicoScope oscilloscope products.

The TA010 is a passive 20:1 attenuator. This means that a 20V signal at its input will appear as a 1V signal on the output. As the signal is attenuated, the TA010 allows voltages of up to 300 V to be measured.

Please note this attenuator should not be used for any high voltage measurements other than fuel injectors and primary ignition.

Write your review
Related Products

Reference: TA000

Brand: Pico Technology

Automotive Test Lead - 3m

Review(s): 0

The TA000 test lead has been custom made for automotive use with the PicoScope. Its long length (3 meters / approx 10 ft) allows the oscilloscope to be placed on the work bench away from the car being tested / repaired. A wide range of probes, clips and gators can be plugged into the 4mm connectors at the end of the cable. The cable is fully screened to...

Price kr249.00
More
In stock, shipped today

Reference: MI074

Brand: Pico Technology

Secondary ignition pickup (capacitive with BNC)

Review(s): 0

Due to the high voltages involved in secondary ignition systems, it is not possible to make measurements by direct connection. Attempting to make a direct connection will almost certainly damage the measuring instrument. The MI074 is a capacitive pickup that simply connects around the insulation of an ignition circuit component such as a plug wire. This...

Price kr398.00
More
In stock, shipped today
16 other products in the same category:

Reference: MA002

Brand: MicroTec

Multimeter Probes

Review(s): 0

The multimeter probes offer a quick and easy solution, where a permanent connection is not required. A test lead can be connected straight into the 4mm socket in the handle of the probe.

Price kr35.00
More
In stock, shipped today

Reference: MI074

Brand: Pico Technology

Secondary ignition pickup (capacitive with BNC)

Review(s): 0

Due to the high voltages involved in secondary ignition systems, it is not possible to make measurements by direct connection. Attempting to make a direct connection will almost certainly damage the measuring instrument. The MI074 is a capacitive pickup that simply connects around the insulation of an ignition circuit component such as a plug wire. This...

Price kr398.00
More
In stock, shipped today

Reference: TA499

Brand: Pico Technology

PicoBNC+ Automotive 10:1 scope probe & adaptor

Review(s): 0

The Pico 10:1 Scope Probe & Adaptor (TA499) with PicoBNC+™ has a high-impedance, fixed x10 attenuation and is intended for both high-speed signals like CAN, FlexRay and for higher voltage signals such as primary ignition. NOTE: This product is fitted with a PicoBNC+ interface, allowing it to be recognised by the software for auto-configuration.The...

Price kr468.00
More
Contact us for delivery time

Reference: MT619

Brand: MicroTec

CAN Test Box (CTB)

Review(s): 0

The CAN Test Box gives you easy access to the 16 pins of the diagnostic connector that is fitted to all modern vehicles. Depending on the configuration of the vehicle, this may allow you to check power, ground and CAN Bus signal quality. With the test adaptors supplied you can connect your PicoScope automotive scope, or any other suitable scope, to the...

Price kr799.00
More
In stock, shipped today

Reference: TA035

Brand: Pico Technology

Mini fuse extension lead

Review(s): 0

Do you need to measure the current through a circuit but can’t find anywhere on the vehicle where you can connect your current clamp? Fuse extension leads are a simple accessory that can save you valuable time. Fuse extension leads are quick and easy to use: simply remove the fuse (of the circuit you wish to test) from your fusebox and replace it with a...

Price kr132.00
More
In stock, shipped today

Reference: TA037

Brand: Pico Technology

Coil-On-Plug HT Extension Lead

Review(s): 0

HT extension leads are the simple accessory that allow you to take accurate secondary ignition measurements on COP ignition systems.

Price kr303.00
More
In stock, shipped today

Reference: TA162

Brand: Pico Technology

Flexible back-pinning Probes

Review(s): 0

These probes are designed for back-probing under the insulation of multi-plug terminals. The TA161 and TA162 have flexible bends to improve access to difficult areas. Each probe fits onto the 4mm plug of our BNC to 4mm test leads.

Price kr26.00
More
In stock, shipped today

Reference: TA432

Brand: Pico Technology

PicoBNC+ resistance test lead

Review(s): 0

This is a brand-new lead and offers dynamic measurement of resistance which is a feature we are using within our guided tests. The TA432 can be used to test diodes, in addition to resistance measurements. NOTE: This product is fitted with a PicoBNC+ interface, allowing it to be recognised by the software for auto-configuration.The product requires a...

Price kr502.00
More
Contact us for delivery time

Reference: TA398

Brand: Pico Technology

PicoBNC+ COP and signal probe

Review(s): 0

The TA398 COP and signal probe from Pico Technology is the easiest and fastest non-intrusive way to check coil-on-plug ignition coils and spark plugs. NOTE: This product is fitted with a PicoBNC+ interface, allowing it to be recognised by the software for auto-configuration.The product requires a PicoScope featuring the PicoBNC+ such as the PicoScope...

Price kr1,395.00
More
Contact us for delivery time

Reference: MA006

Brand: MicroTec

Large Dolphin/Gator Clips

Review(s): 0

The 4mm socket in the back of the Dolphin clip offers an easy connection to a test lead. The toothed grip offers good contact on fine wire, with a 30mm opening diameter limit.

Price kr65.00
More
In stock, shipped today

Reference: MA100

Brand: MicroTec

Test leads with 4mm safety banana plug, set of 5 colors.

Review(s): 0

Test leads with 4mm safety banana plug at both ends, set of 5 colors (Red, black, yellow, green and blue).Can be used with all our probes, tips, clips and gators. Length: 1 meterMax. current: 15A

Price kr119.00
More
In stock, shipped today

Reference: TA004

Brand: Pico Technology

Small Crocodile/Gator Clips

Review(s): 0

The crocodile (gator) clips are fully insulated with a 4mm socket in the handle, offering an easy connection to a test lead. The toothed grip offers good contact on fine wire, with a 11mm jaw opening limit.

Price kr17.00
More
In stock, shipped today

Reference: TA168

Brand: Pico Technology

JCASE fuse extension lead

Review(s): 0

The TA168 JCASE fuse extension lead gives easier access to standard and low profile JCASE fuses. JCASE is a cartridge style fuse with female terminal design, providing both increased time delay and low voltage drop to protect high current circuits & handle inrush currents.

Price kr230.00
More
In stock, shipped today

Follow us on Facebook