Forside

  • Sikker betaling

    Sikker betaling
PicoConnect 441 1:1 differential probe
  • PicoConnect 441 1:1 differential probe

PicoConnect 441 1:1 differential probe for PicoScope 4444

PQ098
Bedømmelse 

The PicoConnect 441 is a general-purpose passive differential probe with 1:1 voltage ratio and 15 MHz bandwidth for precisely measuring voltages on ranges from ±10 mV to ±50 V. The probe is fitted with a ground reference clip, as well as the usual positive and negative leads, to eliminate unknown common mode voltage differences between the probe and the device under test (DUT). It uses unshrouded 4 mm banana plugs, so is compatible with a wide range of test probes, and comes with a pair of sprung hook probes.

This probe is ideal for anyone needing to make lower-amplitude, precision measurements in a wide range of applications. You can also use it to measure the signals on differential serial buses such as CAN and RS-485.

Note: Only for use with PicoScope 4444

313,00 kr.
Ekskl. moms
391,25 kr. Inkl. moms
Antal
På lager, afsendes i dag

 

Kundeservice (+45) 97 84 11 99

 

Hurtig levering 1-2 hverdage

 

Sikker betaling via SSL-forbindelse

Produktoplysninger
PQ098
5055859707766
Anmeldelser
Skriv din anbefaling

Skriv din anbefaling

PicoConnect 441 1:1 differential probe for PicoScope 4444

PicoConnect 441 1:1 differential probe for PicoScope 4444

The PicoConnect 441 is a general-purpose passive differential probe with 1:1 voltage ratio and 15 MHz bandwidth for precisely measuring voltages on ranges from ±10 mV to ±50 V. The probe is fitted with a ground reference clip, as well as the usual positive and negative leads, to eliminate unknown common mode voltage differences between the probe and the device under test (DUT). It uses unshrouded 4 mm banana plugs, so is compatible with a wide range of test probes, and comes with a pair of sprung hook probes.

This probe is ideal for anyone needing to make lower-amplitude, precision measurements in a wide range of applications. You can also use it to measure the signals on differential serial buses such as CAN and RS-485.

Note: Only for use with PicoScope 4444

Skriv din anbefaling
6 andre varer i den samme kategori:
PicoConnect 442 25:1 differential probe (1000 V CAT III)

Reference: PQ087

Mærke: Pico Technology

PicoConnect 442 25:1 differential probe (1000 V CAT III)

Anmeldelse(r): 0
The PicoConnect 442 probe is a 25:1 attenuating probe that enables the PicoScope 4444 differential oscilloscope to measure voltages up to ±1000 V, or voltages with a large common-mode offset. Such voltages are found in electrical power converters, inverters, motor speed controls, switch mode power supplies and many other devices.
1.334,00 kr. ekskl. moms
1.667,50 kr. inkl. moms
Mere
Normalt 1-2 dags levering
60 MHz oscilloskop probe X1/X10

Reference: MI007

Mærke: Pico Technology

60 MHz oscilloskop probe X1/X10

Anmeldelse(r): 0
Denne generel anvendelige oscilloskopprobe af høj kvalitet, har en båndbredde på 60 MHz. Med en 2-position skydeomskifter, kan der vælges mellem en dæmpning på enten x1 eller x10.
149,00 kr. ekskl. moms
186,25 kr. inkl. moms
Mere
På lager, afsendes i dag
350 MHz oscilloskop probe X1/X10

Reference: TA150

Mærke: Pico Technology

350 MHz oscilloskop probe X1/X10

Anmeldelse(r): 0
Passiv oscilloskopprobe: 350 MHz båndbredde 2.5 mm højimpedans, med omskifter mellem 1:1/10:1, BNC.
1.097,00 kr. ekskl. moms
1.371,25 kr. inkl. moms
Mere
Normalt 1-2 dags levering
500 MHz oscilloskop probe X1/X10

Reference: TA133

Mærke: Pico Technology

500 MHz oscilloskop probe X1/X10

Anmeldelse(r): 0
Passiv oscilloskopprobe: 500 MHz båndbredde 2.5 mm højimpedans, med omskifter mellem 1:1/10:1, BNC.
1.603,00 kr. ekskl. moms
2.003,75 kr. inkl. moms
Mere
Normalt 1-2 dags levering
Relaterede produkter
PicoScope 4444 USB-oscilloskop

Reference: PQ088

Mærke: Pico Technology

PicoScope 4444 USB-oscilloskop

Anmeldelse(r): 0
High-resolution differential USB oscilloscope.The PicoScope 4444 and its accessories offer accurate and detailed measurement for a multitude of applications. Key features: 4 fully differential high-impedance inputs  20 MHz bandwidth  Flexible 12 and 14-bit resolution  256 MS deep memory  Rejects common-mode noise  Interface for intelligent probes and...
9.653,00 kr. ekskl. moms
12.066,25 kr. inkl. moms
Mere
Normalt 1-2 dags levering
PicoConnect 442 25:1 differential probe (1000 V CAT III)

Reference: PQ087

Mærke: Pico Technology

PicoConnect 442 25:1 differential probe (1000 V CAT III)

Anmeldelse(r): 0
The PicoConnect 442 probe is a 25:1 attenuating probe that enables the PicoScope 4444 differential oscilloscope to measure voltages up to ±1000 V, or voltages with a large common-mode offset. Such voltages are found in electrical power converters, inverters, motor speed controls, switch mode power supplies and many other devices.
1.334,00 kr. ekskl. moms
1.667,50 kr. inkl. moms
Mere
Normalt 1-2 dags levering

Følg os på Facebook

Facebook