Secure payment
Pico Technology is the market leader in PC Oscilloscopes — the modern alternative to traditional benchtop oscilloscopes.
PicoScopes are used by engineers, scientists, teachers and students to measure and analyze electronic signals to validate and ensure correct and reliable operation of their electronic designs.
PicoScopes provide an informative display and advanced waveform analysis that enhance the productivity of engineers in applications areas such as embedded and automotive systems, high-speed communications, process control, power conversion, avionics, and scientific research.
An integrated function and/or Arbitrary Waveform Generator (AWG) is included with all multi-channel PicoScopes. It can be used to emulate missing sensor signals during product development, or to stress test a design over the full specified operating range.
PicoScope application software is available for MicroSoft Windows 7, 8 and 10, Linux Debian, OpenSUSE, and Fedora derived distributions, plus OS-X (Mac). The supplied Software Development Kit (SDK) contains programming examples in popular languages and environments including MatLab, LabView, C++, and C#.
Pico data acquisition products provide a straightforward solution for a broad range of data logging needs. PicoLog data loggers require no power supply and simply plug into a USB or Ethernet port on a PC or network. Every logger is supplied with data acquisition software to measure, record and analyze parameters such as voltage, current, temperature, humidity, pH, vibration and many others.
There are 124 products.
Reference: TA375
Brand: Pico Technology
Passive oscilloscope probe: 100 MHz bandwidth 1:1/10:1 switchable, BNC.
Reference: TA136
Brand: Pico Technology
The TA136 is a replacement 20-way digital input cable that interfaces up to 16 digital signals to the digital ports on PicoScope 2000, 3000 and 5000 Series Mixed Signal Oscilloscopes (MSOs). Digital inputs: 16 Ground connections: 4 Length: 25 cm (approx. 9.8 in)
Reference: TA386
Brand: Pico Technology
Passive oscilloscope probe: 200 MHz bandwidth 1:1/10:1 switchable, BNC.
Reference: TA010
Brand: Pico Technology
The TA010 has been designed to allow fuel injector and primary ignition waveforms to be measured using PicoScope oscilloscope products. The TA010 is a passive 20:1 attenuator. This means that a 20V signal at its input will appear as a 1V signal on the output. As the signal is attenuated, the TA010 allows voltages of up to 300 V to be measured. Please note...
Reference: TA150
Brand: Pico Technology
Passive oscilloscope probe: 350 MHz 2.5 mm high-impedance 10:1, BNC
Reference: TA133
Brand: Pico Technology
Passive oscilloscope probe: 500 MHz 2.5 mm high-impedance 10:1, BNC
Reference: MI007
Brand: Pico Technology
This high quality, general purpose oscilloscope probe has a 60 MHz bandwidth. A two position slide switch allows attenuation of either x1 or x10 to be selected.
Reference: PS008
Brand: Pico Technology
The PS008 is an AC power adaptor for use with a selection of active differential probes.
Reference: PP311
Brand: Pico Technology
20-Bits High-Resolution Data Logger, 4 differential or 8 single-ended inputs.Comes with terminal board for custom front-end circuitry. When you need the ultimate in precise and accurate data acquisition, the high-resolution ADC-20 data logger is your perfect solution. high resolution data logger 20-bit resolution Up to 4 differential inputs Up to 8...
Reference: PP310
Brand: Pico Technology
Terminal board for Picotech ADC-20/24 data loggers.
Reference: PP312
Brand: Pico Technology
24-Bits High-Resolution Data Logger, 8 true differential inputs or 16 single-ended inputs.Comes with terminal board for custom front-end circuitry. When you need the ultimate in precise and accurate data acquisition, the high-resolution ADC-24 data logger is your perfect solution. 24-bit resolution Up to 8 true differential inputs Up to 16 single-ended...
Reference: TA034
Brand: Pico Technology
Do you need to measure the current through a circuit but can’t find anywhere on the vehicle where you can connect your current clamp? Fuse extension leads are a simple accessory that can save you valuable time. Fuse extension leads are quick and easy to use: simply remove the fuse (of the circuit you wish to test) from your fusebox and replace it with a...
Reference: TA050
Brand: Pico Technology
Attenuator set: 3-6-10-20 dB, 1 GHz 50 Ω 1 W BNC (m-f). The TA050 attenuator set consists of four coaxial attenuators designed for use with signals up to 1 GHz. Each attenuator has a male and a female BNC connector.
Reference: TA000
Brand: Pico Technology
The TA000 test lead has been custom made for automotive use with the PicoScope. Its long length (3 meters / approx 10 ft) allows the oscilloscope to be placed on the work bench away from the car being tested / repaired. A wide range of probes, clips and gators can be plugged into the 4mm connectors at the end of the cable. The cable is fully screened to...
Reference: MI078
Brand: Pico Technology
The MI078 BNC to 4 mm adaptor connects two 4 mm “banana” plugs to a BNC socket.
Reference: MI029-1
Brand: Pico Technology
The MI029-1 is a 1.2 m (3.9 ft) cable for connecting a BNC socket to two red and black 4 mm "banana" plugs.
Reference: MI029
Brand: Pico Technology
The MI029 is a 1.2 m (3.9 ft) cable for connecting a BNC socket to two red and black 4mm safety banana plugs.
Reference: MI030
Brand: Pico Technology
The MI030 is a 1.8m BNC plug to BNC plug cable, useful for connecting signal sources with BNC output to oscilloscope inputs.
Reference: MI031
Brand: Pico Technology
The MI029 is a 1.2 m (3.9 ft) cable for connecting a BNC socket to two red and black crocodile clips.
Reference: TA037
Brand: Pico Technology
HT extension leads are the simple accessory that allow you to take accurate secondary ignition measurements on COP ignition systems.
Reference: PP400
Brand: Pico Technology
HT extension leads are the simple accessory that allow you to take accurate secondary ignition measurements on COP ignition systems.
Reference: TA019
Brand: Pico Technology
600A AC/DC current clamp with BNC connector.The TA019 current clamp is ideal for use with a PicoScope oscilloscope to display starter current waveforms, charging currents and for performing quick compression tests.
Reference: TA167
Brand: Pico Technology
This current clamp is suitable for measuring currents of upto 2000 A DC or 1500 A AC and is terminated in a BNC connector.
Reference: TA042
Brand: Pico Technology
100 MHz 1400 V differential oscilloscope probe 100:1/1000:1
