• Secure payment

List of products by brand MicroTec

Active filters

Reference: MT921

Brand: MicroTec

PicoScope 2405A 4-channel automotive starter kit

Review(s): 0
The 4–Channel Starter Kit gives you the lowest possible cost entry into PicoScope ownership.The kit comes complete with a basic set of leads and clips to allow you to perform many common tasks including testing most sensors.Over time accessories such as current clamps and ignition probes can be added to expand its uses. Note: Comes with the standard...
Price kr4,289.00
More
In stock, 1-2 days delivery

Reference: MT920

Brand: MicroTec

PicoScope 2205A 2-channel automotive starter kit

Review(s): 0
The 2–Channel Starter Kit gives you the lowest possible cost entry into PicoScope ownership.The kit comes complete with a basic set of leads and clips to allow you to perform many common tasks including testing most sensors.Over time accessories such as current clamps and ignition probes can be added to expand its uses. Note: Comes with the standard...
Price kr2,095.00
More
In stock, shipped today

Reference: Type-KM

Brand: MicroTec

Miniature Type-K Plug

Review(s): 0
A miniature in-line thermocouple plug connector which is colour coded in accordance with IEC specification. This thermocouple plug is ideal for connecting your thermocouple probe or wire terminals to extension or compensating cables. This male plug also provides a quick, safe and error-free way of replacing your existing thermocouples. The plug housing is...
Price kr60.00
More
In stock, shipped today

Reference: Type-KF

Brand: MicroTec

Miniature Type-K hunstik

Review(s): 0
Miniature in-line thermocouple socket connector which is colour coded in accordance with IEC specification. This thermocouple socket is ideal for connecting your thermocouple probe or wire terminals to extension or compensating cables. This female socket also provides a quick, safe and error-free way of replacing your existing thermocouples. The socket...
Price kr60.00
More
In stock, shipped today

Reference: MA002

Brand: MicroTec

Multimeter Probes

Review(s): 0
The multimeter probes offer a quick and easy solution, where a permanent connection is not required. A test lead can be connected straight into the 4mm socket in the handle of the probe.
Price kr35.00
More
In stock, shipped today

Reference: MA006

Brand: MicroTec

Large Dolphin/Gator Clips

Review(s): 0
The 4mm socket in the back of the Dolphin clip offers an easy connection to a test lead. The toothed grip offers good contact on fine wire, with a 30mm opening diameter limit.
Price kr65.00
More
In stock, shipped today

Reference: MA008

Brand: MicroTec

Backpinning Probe Set

Review(s): 0
The Back Probe MT008 is very useful in back probing connectors to measure in an existing circuit without having to use a break out box or damage the wire isolation. The long, thin and flexible pins can easily be slided between the connector housing and the contacts in the connector.
Price kr199.00
More
In stock, shipped today

Reference: MA012

Brand: MicroTec

2 Pin AMP connector breakout lead

Review(s): 0
The MA012 AMP breakout lead enables you to take voltage readings from the numerous 2-pin sensors and actuators in the engine compartment. Simply connect the breakout lead into the existing cable loom, and then take the output signal from the two 4 mm banana plugs into the automotive oscilloscope using the TA000 test leads. The breakout cable gives access...
Price kr139.00
More
In stock, shipped today

Reference: MT619

Brand: MicroTec

CAN Test Box (CTB)

Review(s): 0
The CAN Test Box gives you easy access to the 16 pins of the diagnostic connector that is fitted to all modern vehicles. Depending on the configuration of the vehicle, this may allow you to check power, ground and CAN Bus signal quality. With the test adaptors supplied you can connect your PicoScope automotive scope, or any other suitable scope, to the...
Price kr869.00
More
In stock, shipped today

Reference: TA018

Brand: MicroTec

Current clamp with BNC plug (60A AC/DC)

Review(s): 0
60A AC/DC current clamp with BNC connector and 2.5 meter long cable.The TA018 current clamp can measure currents from 10 mA up to 60 A with a switch-selectable high and low range. A simple pushbutton is included for zero adjustment when measuring DC current. The TA018  current clamp meets IEC 61010-1 CAT II 300V and is equipped with LED indication for...
Price kr814.00
More
In stock, shipped today

Reference: TA009

Brand: MicroTec

Current clamp with 4mm banana plug (60A AC/DC)

Review(s): 0
60A AC/DC current clamp with 4mm banana plug and 80 cm long coiled cable.The TA009 current clamp can measure currents from 10 mA up to 60 A with a switch-selectable high and low range. A simple pushbutton is included for zero adjustment when measuring DC current. The TA009 current clamp meets IEC 61010-1 CAT II 300V and is equipped with LED indication for...
Price kr691.00
More
In stock, shipped today

Reference: MA100

Brand: MicroTec

Test leads with 4mm safety banana plug, set of 5 colors.

Review(s): 0
Test leads with 4mm safety banana plug at both ends, set of 5 colors (Red, black, yellow, green and blue).Can be used with all our probes, tips, clips and gators. Length: 1 meterMax. current: 15A
Price kr149.00
More
In stock, shipped today

Follow us on Facebook