• Secure payment

PicoBNC+ 60A AC/DC current clamp
  • PicoBNC+ 60A AC/DC current clamp
  • PicoBNC+ 60A AC/DC current clamp

PicoBNC+ 60A AC/DC current clamp

TA473
Rating 

The TA473 current clamp is ideal for use with PicoScope automotive oscilloscopes for measuring currents between 10 mA and 60 A. This enables the PicoScope to display current waveforms for fuel injectors and fuel pumps.

NOTE: This product is fitted with a PicoBNC+ interface, allowing it to be recognised by the software for auto-configuration.
The product requires a PicoScope featuring the PicoBNC+ such as the PicoScope 4225A or PicoScope 4425A, and will not work with older PicoScope models. Use TA018 if you have a PicoScope model without PicoBNC+.

kr2,185.00
Tax excluded
Quantity
In stock, shipped today

 

Customer service (+45) 97 84 11 99

 

Fast delivery 1-2 business days

 

Secure payment via SSL connection

Description

The TA473 has a specification superior to both the TA018 and TA234 bringing improved performance and diagnostic accuracy to the workshop. In common with the TA388, it is fitted with a PicoBNC+ interface. The clamp can be auto-configured by PicoScope software when it is connected to the scope. Ranging is carried out automatically with no user switching required. The clamp is powered via the scope and therefore does not require any batteries. Additionally, the clamp is auto-zeroed whenever it is connected to the scope.

In use, there is no need to break into the circuit or disturb the isolation as the opening jaws simply clamp around the current-carrying conductor. No electrical contact is required.

These current clamps have been designed for use with PicoScope oscilloscopes and feature additional screening to reduce noise pickup. The Pico TA473 current clamp can either be purchased as an accessory within one of our popular diagnostic kits or individually but requires a PicoScope featuring the PicoBNC+ such as the 4225A or 4425A.

Typical Uses
The TA473 clamp boasts amazing resolution and accuracy with reduced noise levels so ensuring improved measurements in all applications.

  • Petrol and diesel injector operation
  • Solenoid testing
  • Throttle motor functions
  • EGR actuator testing
  • Broadband 02 sensor testing (in conjunction with current multiplier)
  • High current consumption tests up to 60 Amps (Motor lock-up test)
  • Parasitic drain measurements
Product Details
TA473

Specific References

EAN13
5055859705540
Reviews

Write your review

PicoBNC+ 60A AC/DC current clamp

PicoBNC+ 60A AC/DC current clamp

The TA473 current clamp is ideal for use with PicoScope automotive oscilloscopes for measuring currents between 10 mA and 60 A. This enables the PicoScope to display current waveforms for fuel injectors and fuel pumps.

NOTE: This product is fitted with a PicoBNC+ interface, allowing it to be recognised by the software for auto-configuration.
The product requires a PicoScope featuring the PicoBNC+ such as the PicoScope 4225A or PicoScope 4425A, and will not work with older PicoScope models. Use TA018 if you have a PicoScope model without PicoBNC+.

Write your review
5 other products in the same category:

Reference: TA388

Brand: Pico Technology

PicoBNC+ 2000 A AC/DC current clamp

Review(s): 0
The 2000 A current clamp allows you to measure up to 2000 amps without cutting, or disconnecting or stripping wires. Simply clamp the jaws around the cable to be tested and plug the clamp into your PicoScope. NOTE: This product is fitted with a PicoBNC+ interface, allowing it to be recognised by the software for auto-configuration.The product requires a...
Price kr2,185.00
More
In stock, shipped today

Reference: TA018

Brand: MicroTec

Current clamp with BNC plug (60A AC/DC)

Review(s): 0
60A AC/DC current clamp with BNC connector and 2.5 meter long cable.The TA018 current clamp can measure currents from 10 mA up to 60 A with a switch-selectable high and low range. A simple pushbutton is included for zero adjustment when measuring DC current. The TA018  current clamp meets IEC 61010-1 CAT II 300V and is equipped with LED indication for...
Price kr889.00
More
In stock, shipped today

Reference: TA019

Brand: Pico Technology

Current clamp (600A AC/DC)

Review(s): 0
600A AC/DC current clamp with BNC connector.The TA019 current clamp is ideal for use with a PicoScope oscilloscope to display starter current waveforms, charging currents and for performing quick compression tests.
Price kr1,115.00
More
In stock, shipped today

Reference: TA189

Brand: Pico Technology

30A AC/DC precision current probe, BNC connector

Review(s): 0
The TA189 30A high-precision current probe is for applications requiring current measurement without the need to disconnect wiring, using closed-loop Hall effect technology to measure both AC and DC current with high stability over long periods of time.
Price kr3,421.00
More
In stock, 1-2 days delivery

Follow us on Facebook