The PicoScope 3416E is a compact 4-channel USB PC oscilloscope with 200 MHz bandwidth, designed for professional electronic measurement, development, servicing and troubleshooting. With sampling rates up to 5 GS/s, the instrument combines high time resolution with the ability to monitor four analog signals simultaneously.
Selectable 8- or 10-bit hardware resolution allows the oscilloscope to be configured for either maximum sampling speed or increased vertical resolution according to the measurement requirements. When using a single channel, sampling rates reach 5 GS/s in 8-bit mode or 2.5 GS/s in 10-bit mode. PicoScope 7 also provides Enhanced Resolution processing, which can increase the effective vertical resolution by up to 4 additional bits.
One of the key features of the PicoScope 3416E is its deep capture memory of up to 2 GS. Long time periods can be recorded at high sampling rates and examined in detail afterwards using the powerful zoom functions in PicoScope 7. Short glitches, intermittent faults and other events can therefore be investigated without sacrificing the context provided by a long waveform capture.
PicoScope 7 provides a comprehensive set of tools for waveform analysis. In addition to advanced triggering, automatic measurements, math channels and mask limit testing, the software supports decoding of a wide range of serial communication protocols. These include I²C, SPI, UART/RS232, CAN, CAN FD, CAN XL, LIN, FlexRay, Ethernet and USB.
The integrated single-channel 20 MHz arbitrary waveform generator (AWG) provides both standard functions and user-defined waveforms. It can, for example, be used to stimulate a circuit while the oscilloscope simultaneously measures and analyzes its response.
The PicoScope 3416E connects to a PC via USB 3.0 SuperSpeed and operates with PicoScope 7 software for Windows, macOS and Linux. Its compact format and PC-based operation provide a flexible alternative to a traditional benchtop oscilloscope, with advanced software functionality included without additional license fees.
PicoScope 3416E oscilloscope kit contents:
1 x PicoScope 3416E oscilloscope
4 x TA386, 200 MHz, 1:1/10:1 probes
1 x TA532 USB-C to USB-C cable, 1.8 m
1 x TA534 USB-A to USB-C cable, 0.9 m
1 x PS017 USB-C power supply with UK, EU, US and AUS plug tops
1 x User's Guide
Specifications
Analog channels
Analog input channels: 4
Bandwidth (–3 dB): 200 MHz
Vertical resolution: 8 bit / 10 bit
Enhanced vertical resolution: Hardware resolution + 4 bits (software)
Input connector: BNC(f)
Input impedance, 50 Ω: 50 Ω ±2%
Maximum sampling rate, 8-bit: 5 GS/s on 1 channel, 2.5 GS/s on 2 channels, 1.25 GS/s on 3-4 channels
Maximum sampling rate, 10-bit: 2.5 GS/s on 1 channel, 1.25 GS/s on 2 channels, 625 MS/s on 3-4 channels
Memory depth, 8-bit: Up to 2 GS
Memory depth, 10-bit: Up to 1 GS
Serial decoding
10BASE-T1S, 1-Wire, ARINC 429, BroadRReach, CAN, CAN FD, CAN J1939, CAN XL, DALI, DCC, Differential Manchester, DMX512, Ethernet 10BASE-T, Extended UART, Fast Ethernet 100BASE-TX, FlexRay, I²C, I²S, I3C BASIC v1.0, LIN, Manchester, MIL-STD-1553, MODBUS ASCII, MODBUS RTU, NMEA-0183, Parallel Bus, PMBus, PS/2, PSI5 (Sensor), Quadrature, RS232/UART, SBS Data, SENT Fast, SENT Slow, SENT SPC, SMBus, SPI-MISO/MOSI, SPI-SDIO, USB (1.0/1.1) and Wind Sensor.
General
Waveform generator: 1 channel, 20 MHz arbitrary waveform generator
PicoScope 7 software: Windows, macOS and Linux
PC interface: USB 3.0 SuperSpeed (USB 2.0 compatible)
Dimensions: 221 × 173 × 30 mm
Weight: < 0.7 kg
Environmental compliance: RoHS, REACH and WEEE
Safety compliance: Designed to EN 61010-1:2010 + A1:2019
.jpg)
